Miele KFN 14842 SD ed Operating And Installation Manual page 52

Changing the door hinging
Before beginning, make sure that
the door shelves are empty.
Removing the soft-close mechanism
for the upper door
^ Open the refrigerator door.
^ Prise open panel a from the
soft-close mechanism by inserting a
flat-bladed screwdriver into the gap
from above and easing it off bit by
bit.
Take care not to damage the door
seal.
If the door seal becomes damaged,
the door will no longer close
properly and cooling will be
impaired.
52
^ Slide panel a towards the appliance,
and leave it hanging between the
door and the appliance.
^ Fit restraining clip b (supplied with
the appliance) onto soft-close
mechanism c.
The restraining clip stops the hinge
from snapping shut. Do not remove the
clip until told to do so.
^ Carefully prise open cover d from
above and below using a flat-bladed
screwdriver.
^ Push hinge pin e up and out from
underneath using a flat-bladed
screwdriver.