Active Charcoal Filters; To Change The Active Charcoal Filters - Miele KFN 14842 SD ed Operating And Installation Manual

Active charcoal filters

The active charcoal filters should be
changed approx. every 6 months.
When the Change active charcoal filter
indicator lights up red, the active
charcoal filters need to be changed.
To change the active charcoal
filters
^ Pull the active charcoal filter holder
upwards to remove it from the shelf.
^ Take out the two filters and fit the new
filters into the holder with the
protruding cloth edge facing
downwards.
^ Place the holder in the middle of the
raised edge at the back of the shelf,
so that it clicks into position.
40
To confirm the filters have been
changed
^ Touch the Change active charcoal
filter indicator for approx. 2 seconds.
The indicator light will go out, and the
counter will be reset.
To delay changing the active
charcoal filters
If you do not have new active charcoal
filters, you can order them from your
Miele dealer or from the Miele Spare
Parts Department.
You can switch off the Change active
charcoal filter indicator early, if you
would prefer not to have the red
indicator showing.
^ Touch the Change active charcoal
filter indicator for approx. 2 seconds.
The Change active charcoal filter
indicator will go out.