Table of Contents
Advertisement
Changing the door hinging
^ Attach panel b to soft-close
mechanism bracket d.
^ Align bracket d to the hinge plate,
and insert pin e from above so that
the right angle fits into the recess.
^ Click cover f back into place.
Make sure that cover f fits properly so
that the door can be closed without
hindrance and the pin is protected.
^ Remove retaining clip g.
^ Replace panel b onto the soft-close
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
^ Close the lower appliance door.
58
Refitting the upper door:
^ Then fit the top door on middle hinge
pin i.
^ Close the upper door.
^ Fit hinge plate n onto the opposite
side and secure it with screws m.
If necessary drill pilot holes for the
screws or use a battery operated
screwdriver.
^ Refit cover k on the opposite side.
^ Align the door with the appliance
housing using the long slot in the
lower hinge plate. Then tighten the
screws.
Hide quick links:
Advertisement
Table of Contents
