Table of Contents
Advertisement
Changing the door hinging
Before beginning, make sure that
the door shelves are empty!
Removing the soft-close mechanism
for the upper door:
^ Open the upper door.
^ Prise open a from the soft-close
mechanism by inserting a flat-bladed
screwdriver into the gap from above
and easing it off bit by bit.
Take care not to damage the door
seal.
If the door seal becomes damaged,
the door will no longer close
properly and cooling will be
impaired.
52
^ Slide panel a towards the appliance,
and leave it hanging between the
door and the appliance.
^ Fit restraining clip b (supplied with
the appliance) onto soft-close
mechanism c.
The restraining clip stops the hinge
from snapping shut. Do not remove the
clip until told to do so.
^ Carefully prise open d from above
and below using a flat-bladed
screwdriver.
^ Push hinge pin e up and out from
underneath using a flat-bladed
screwdriver.
^ Remove cover d.
The soft-close mechanism is now no
longer fixed to the appliance.
^ Remove panel a.
Hide quick links:
Advertisement
Table of Contents
