Table of Contents
Advertisement
^ Fit hinge pin i into middle hinge
plate k in the lower door.
Replacing the lower soft-close door
mechanism:
^ Remove cover a from panel b,
rotate it by 180° and refit it on the
other side.
Changing the door hinging
^ Insert the soft-close mechanism back
into the door, starting at the right
hand side.
^ Slide the soft-close mechanism back
into the door as far as it will go
towards the appliance using a
flat-headed screwdriver.
The screw holes on the left and right
must line up perfectly.
^ First screw the soft-close mechanism
onto the appliance side, then onto
the handle side c, pushing it firmly
towards the appliance.
57
Hide quick links:
Advertisement
Table of Contents
