Building In The Appliance; Building Into A Peninsular Run; Aligning The Housing Unit - Miele KDN 9713 iD Operating And Installation Manual

All building-in instructions given are
for a right hand hinged appliance.
If you have converted the appliance
to left hand hinging you will need to
adapt these instructions
accordingly.

Building into a peninsular run

When built into a peninsular run, the
rear of the building in niche must be
fitted with a kitchen furniture panel.

Aligning the housing unit

Before installing the appliance, the
housing unit must be carefully aligned
using a spirit level. The housing unit
corners must be at right angles, as
otherwise the appliance furniture door
will not align correctly with the 4
corners of the unit. Align the furniture
door with the hinges.

Building in the appliance

Preparing the appliance
^ Slide cover strip a into the holder as
shown, with the bumps facing
downwards. The bumps will fit into
keyhole slots b. The cover strip is
then flush with the side of the
appliance on which the door is
opened c.
41