Aligning The Appliance Doors - Miele KDN 12823 S Operating And Installation Manual

Aligning the appliance doors

The appliance doors can be aligned
with the housing at a later date.
In the following illustration the door
is not shown in the closed position to
make it easier to see what happens
next.
To align the lower door use the long
outer slots in the lower hinge plate:
^ Remove centre screw a from the
hinge plate.
^ Slightly loosen both outer screws b.
^ Align the door by sliding the hinge
plate to the left or right.
^ Then tighten screws b again. Screw
a does not need to be refitted.
44
To align the upper door use the long
outer slots in the middle hinge plate:
^ Remove centre screw a from the
hinge plate.
^ Slightly loosen both outer screws b.
^ Align the door by sliding the hinge
plate to the left or right.
^ Then tighten screws b again. Screw
a does not need to be refitted.