Miele GT 225 ES Operating And Installation Manual page 10

^ Clean the inside of the appliance and
the accessories with luke warm water
and a little washing up liquid and
then dry using a soft cloth.
^ Use the stopper supplied to plug the
defrosting outlet in the bottom of the
interior of the appliance.
Important:
To ensure correct functioning of the
appliance let it stand for between
1/2 and 1 hour after transporting it to
its final location before connecting it
to the mains.
^ Press the On-Off button.
Bars appear in the temperature display
and the alarm sounds. The freezer
starts cooling. The interior lighting will
come on when the lid is opened.
Allow the freezer to run for a few hours
before placing food in it. This will en-
sure that the temperature is sufficiently
low.
10
^ Press the alarm button.
The alarm stops. The bars in the tem-
perature display will remain lit until the
temperature reaches 0 °C.
To save space place the ice pack on
the freezer tray. The ice pack will be at
its most effective after it has been in the
freezer for approx. 24 hours.
^ Press the On/Off button for approx.
3 seconds until the temperature dis-
play goes out.
If the temperature display does not go
out, the safety lock is activated.