Miele FN 4957 S ed-1 Operating And Installation Manual page 35

Installing in a side-by-side combination
^ Fit cover q in the space between the
control panels. Make sure that the
outer edges of the cover are flush
with the control panels. The cover
can be pulled out to adjust it to the
right size.
The gap in the cover must face
downwards to fit properly over the
stainless steel trim.
^ Break off thin tags r from plinth
facings a. Important: Make sure you
remove these from the correct side -
i.e. from the handle side of the
appliances.
^ Refit plinth facings , pushing firmly
into position.
^ Refit covers b.
35