Additional Functions; Pre-Heat - Miele DG 5030 Operating And Installation Manual

Pre-heat

Using pre-heat
Not using pre-heat
Your appliance has a pre-heating function. This heats the
oven interior to approx. 40 °C. The heating-up time is then
shorter as the oven interior is pre-heated and therefore the
cooking process takes less time.
The appliance is delivered with the pre-heating function
deactivated. If you wish to use it you will need to alter the
setting (see "Programming / Pre-heat").
When the pre-heat function has been activated you can still
choose whether you want to use it for each programme.
The water container must be filled with water for
pre-heating and present in the appliance.
The pre-heating process will be cancelled if the door is
opened. You can start the process again by switching the
appliance off and then back on again.
^ Switch on the appliance.
100 will appear in the display. "°C" will start flashing. Do not
confirm.
After a few seconds the pre-heating process will begin and
the display will show the temperature as it rises.
When pre-heating is finished, 100 will appear in the display
and °C will flash.
^ Place the food in the oven.
^ Set the temperature and duration as normal.
^ Place the food in the oven.
^ Switch on the appliance.
100 will appear in the display. "°C" will start flashing.
^ Confirm this or set the required temperature.
^ Set the required duration.

Additional functions

23