Miele G 690 Operating Instructions Manual page 65

I
Adjust the rear screw feet to the re-
quired height.
Higher = turn clockwise
Lower = turn anti-clockwise
Several turns are needed to adjust 1
mm in height. A battery powered screw-
driver could be used.
Installing integrated "i" Dishwashers
It is easier to adjust the screw feet if the
weight of the dishwasher is not bearing
down on them.
Screw the feet out until the dishwasher
is right up against the underside of the
worktop, to which it will be screwed
later. Ensure that the dishwasher
stands level.
Adjust the front screw feet manually
or with a flat blade screwdriver.
If possible tip the machine slightly.
For fine adjustments it may be
necessary to press with a screw-
driver against the cogs of the feet.
65