Miele G 686 Plus Operating Instructions Manual page 40

During the drying phase, as long as the
door of the dishwasher remains closed,
moist air is expelled through the ventila-
tion outlet for the drying fan. The drying
fan running time can be increased to
avoid the risk of damage to a worktop
fitted above the dishwasher. If this op-
tion is selected, the fan will continue to
run for approx. 14 minutes after the end
of a programme.
^ Switch the dishwasher off using the
"On/Off" button.
^ Turn the programme selector to the
"Stop" position.
^ Press $ and "Start" in and whilst do-
ing so switch the dishwasher on us-
ing the "On/Off" button. Then release
these buttons.
A P and two digits will appear in the
time display.
The "Salt" indicator light will flash.
If this is not the case the process must
be repeated.
40
^ Turn the programme selector to the "9
o'clock" position.
The following values will show in the
display:
– 90: the fan running time is not in-
creased,
– 91: The fan running time is increased
^ Press the "Top Solo" button to change
the setting.
The value in the display will change ac-
cordingly.
^ Turn the programme selector to the
"Stop" position.
A P and 2 digits will appear in the time
display.
^ Press the "Start" button.
SP for save will appear in the time dis-
play.
^ Press the "Start" button again.
The fan running time change is now
stored in memory.
The "Start" indicator light will flash.
^ Switch the dishwasher off using the
"On/Off" button.