Child Safety Lock - Miele G 686 Plus Operating Instructions Manual

^ Press the "Start" button (20).
The "Start" indicator light (20) comes
on, and the light ring goes out 10 min-
utes later. If one of the buttons on the
control panel is pressed or the
programme selector is turned during
the delay start period the light ring will
come on again for 10 minutes.
The time starts counting down until the
programme start time. The delay time
counts down in 1 hour steps for delay
start periods of over 10 hours, and in
minutes for periods under 10 hours.
At the end of the delay period the se-
lected programme begins automati-
cally. The time left for a programme to
run then shows in the display, the "De-
lay Start" indicator light goes out and
the "Time left" indicator light and the
light ring come on.
up to 59 minutes:
e.g. 30 minutes = 30
between 1 hour and 9 hours 30 minutes:
e.g. 5 hours = 5.00
10 hours and over:
e.g. 15 hours = 15^
,
To prevent children coming into
contact with dishwasher detergent
only fill the detergent dispenser im-
mediately before starting the
programme, i.e. before pressing the
"Start/Stop" button, and activate the

child safety lock.

When using the "Delay Start" func-
tion, make sure that the compart-
ment is dry before adding detergent.
Wipe dry with a cloth if necessary.
Do not use liquid detergent when
selecting "Delay Start" as it may run
out of the compartment before the
programme starts.
A programme can be started before the
delay start period has elapsed. Pro-
ceed as follows:
^ Turn the programme selector (17) to
the "Stop" position.
^ Leave the selector in this position for
at least one second.
The "Delay Start" indicator light (18)
goes out.
^ Then turn the programme selector
(17) to the programme you wish to
use.
If the "Top Solo" function had been se-
lected, then you will need to select it
again.
^ Press the "Start" button (20).
The programme cycle begins. The
"Start" indicator light (20) comes on.
39