Miele G 601 Operating Instructions Manual page 47

The rinse aid amount may
be insufficient or the rinse
aid reservoir empty.
Crockery was taken out of
the cabinet too soon.
Drying heat is switched
off.
Not enough rinse aid was
used.
There is no salt in the salt
reservoir.
The salt reservoir cap has
not been screwed on cor-
rectly.
The water softener is pro-
grammed to a setting
which is too low.
Combination dishwasher
detergent tablets contain-
ing rinse aid and/or salt
may have been used.
These are unsuitable as
long term use can impair
the softener unit.
The rinse aid dosage is
set too high.
Increase the dosage or
replenish the reservoir,
see "Before using for the
first time".
Leave it in for longer, see
"Operating the dish-
washer".
Switch the "Drying heat"
option back on. See "Op-
erating the dishwasher".
Increase the dosage, see
"Before using for the first
time".
Add dishwasher reactiva-
tion salt, see "Before using
for the first time".
Replace it making sure it
screws back on correctly.
Programme a higher set-
ting, see "Before using for
the first time".
Use a standard liquid,
tablet or powder deter-
gent.
Reduce the dosage, see
"Before using for the first
time".
47