Miele G 1730 Operating Instructions Manual page 53

Problem
Dishes, cutlery and
glasses are not dry
or are flecked.
White residue is
visible on cutlery
and crockery,
clouding occurs on
glassware; film can
be wiped off.
Possible cause
The rinse aid amount may
be insufficient or the rinse
aid reservoir empty.
Crockery was taken out of
the cabinet too soon.
You are using "2 in 1" or
"3 in 1" tablets, which do
not have a strong enough
drying performance.
The dishwasher has been
set for 2 in 1 or 3 in 1
tablets, even though this
type of detergent has not
been used.
Not enough rinse aid was
used.
There is no salt in the salt
reservoir.
An unsuitable "2 in 1" or
"3 in 1" tablet has been
used.
There is a fault with the
automatic water softening
system.
Problem solving guide
Remedy
Replenish the reservoir,
increase the dosage or
change the brand of rinse aid.
See "Before using for the first
time".
Leave it in for longer. See
"Operation".
Set the Detergent type to
"Normal", and fill the rinse aid
reservoir with rinse aid (see
"Settings menu J, Detergent
type").
Set the Detergent type for the
product being used (see
"Settings menu J, Detergent
type").
Increase the dosage (see
"Settings menu J, Rinse aid").
Fill the salt reservoir. See
"Before using for the first
time".
Change your detergent. Use a
standard liquid, tablet or
powder detergent and fill the
salt and rinse aid reservoirs in
the dishwasher.
Call the Service Department.
53