Advertisement
If there are gaps in your analog video tape, MyDVD may stop
■
capturing. To continue, start capturing a new clip after the gap.
Gaps in video footage are often caused by stops, pauses, static,
or unrecorded space in the original recording. They can also be
caused by old, damaged, or deteriorated video tapes.
Set your computer monitor's screen resolution to 1024 x 768 or
■
higher for optimum viewing.
If you are playing your video and it is not appearing on the
■
MyDVD Main project window, make sure MyDVD is capturing
from the correct device.
To check your device, go to the Capture Window (as shown in
Step 3
of
page
Make sure Adaptec AVC-1200 Video Capture is selected.
To avoid choppy video in a captured file, especially a long
■
video clip, disable any scanning background programs such as
virus software or any CPU-loaded software.
26) and under Record Settings, click Change.
Getting Help
33
Advertisement
