Advertisement
Adaptec AVC-1200 User's Guide
Getting Help
Registering Your AVC-1200
To ensure your eligibility for support and upgrades, and to qualify
for future promotions, please register your AVC-1200 on the
Adaptec website at
Troubleshooting Your AVC-1200
If you encounter difficulties installing or using your AVC-1200,
follow these suggestions:
Ensure that your analog video device is connected, powered on,
■
and set up to provide a video signal to the AVC-1200.
Double-check all cable connections.
■
Try connecting to a different USB port on your system.
■
If your AVC-1200 is connected to a USB hub, try connecting it
■
directly to a system USB port. (Adaptec highly recommends that
you connect directly to your computer, and not through a USB
hub.)
Ensure that the AVC-1200 is connected properly and that the
■
drivers have installed correctly. (See
page 6
for detailed instructions.)
Need Help Capturing Your Video?
Note: Due to Windows' FAT file system, the largest file you
can capture is 4 GB. If possible, use a NTFS formatted hard
disk drive.
MyDVD may not be able to recognize video from a damaged or
■
degraded video tape.
32
register.adaptec.com
.
Installing the Drivers on
Advertisement
