Advertisement
Click Universal Serial Bus controllers.
■
should be listed.
Device
Drivers
If any or all of these drivers don't appear, refer to
Your AVC-1200 on page
Windows 2000
When you plug in your AVC-1200, Windows 2000 automatically
detects it and opens the Found New Hardware Wizard. To perform
the installation, follow the instructions provided in this section.
During the installation process, the Audio Capture driver is
installed first and the Video Capture driver is installed next. To
ensure that all drivers are installed properly, follow the
instructions provided in
page
13.
To install the drivers:
1 Insert the CD from your VideOh! CD kit into your CD-ROM
drive.
Note: If the VideOh! software installation screen appears,
exit this screen until driver installation is complete.
32.
Double-Checking Driver Installation on
Installing the Drivers
USB Composite
Troubleshooting
9
Advertisement
