Checking The Programmed Water Hardness Level - Miele G 1102 SCi Operating Instructions Manual

Before using for the first time
Checking the programmed water
hardness level
^ Switch the dishwasher off with the
On/Off button K.
^ Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
until the "Start/Stop" indicator light
comes on.
^ Press the programme selector button
twice.
The Wash/Rinse indicator will flash for
the number of times which corresponds
to the water hardness level which has
been set (see chart).
^ Switch the dishwasher off with the
On/Off button K.
16