Powering On/Off Your Digital Camera - Vivitar ViviCam X137 User Manual

Powering ON/OFF Your Digital camera

 Make sure the batteries have been installed properly into your digital camera.
 Make sure an SD card has been installed properly into your camera.
Powering the camera ON
Press the Power button to turn your camera ON.
 After powering on, the camera emits a sound and the LED light turns on briefly.
 The LCD touch screen turns on with your camera in Photo Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the Power button again at any point to turn your camera
OFF. You will see a "Goodbye" splash screen and then the camera will power off completely.
Alternatively, you can press the HOME button and then tap the Power Off icon. Tap 'Yes' to select to
power off the digital camera.
NOTE: Your digital camera also has an Auto Power Off feature that automatically turns off your
camera after a specific period of time that your camera is left idle. The Auto Power Off time can be set
from the Setup/Auto Off menu settings.
11