Powering On/Off Your Digital Camera; Changing Camera Mode - Vivitar VIVICAM F536 User Manual

Powering ON/OFF Your Digital Camera

 Make sure the batteries have been inserted properly into your digital camera. If your camera
comes with a rechargeable lithium battery, make sure it is fully charged before the first use.
 Make sure an SD card has been inserted into your camera.
(SD card up to 32GB - SD Card not included)
Powering the camera ON
Press the Power
to start.
Powering the camera OFF
While the camera is on, you can press the Power
camera OFF. You will see a "Goodbye" splash screen and then the camera will power off
completely.
Note: Your digital camera also has an Auto Power Off feature that will automatically turn off your
camera after a specific period of time that your camera is left idle. The Auto Power Off settings
can be set from the Auto Power Off settings in the Video/Photo Capture Mode menu.

Changing Camera Mode

Your camera has three main modes:
1) Photo Capture Mode - Use this mode to capture photos with your camera.
2) Video Capture Mode - Use this mode to capture videos with your camera.
3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos
you have already taken with your camera.
When the camera is first powered ON, the Photo Capture Mode will be active. The icons that
appear on the LCD screen are the best default settings so that you can begin to capture and
enjoy clear quality photos.
button to turn your camera ON. The camera will be in Photo Capture mode
button again at any point to turn your
10