Vivitar 63009 User Manual page 24

5. Press the MENU button to exit.
Default
Reset the camera to the original factory setting.
1. Press the Down button to select the Default mode.
2. Press the Right button for the Default options to appear:
Load , No.
3. Press the Up/Down button to highlight and select the Default option you desire.
4. If you select Load the camera will reset itself to the original factory setting.
5. Press the OK button to confirm and save your choice.
6. Press the MENU button to exit.
USB Mode
Select the "Mass Storage" mode to download, delete, upload files to your PC or use your camera
as a removable disk.
Select the "PC Camera" mode to use this camera as a PC Camera.
1. Press the Down button to select the USB Mode.
2. Press the Right button for the USB Mode options to appear:
Mass Storage , PC Camera.
3. Press the Up/Down button to highlight and select the USB Mode option you desire.
Note: The mode you select will appear by default when connecting the camera to the PC.
If you desire the other mode once connected to the PC press the MODE button to change.
4. Press the OK button to confirm and save your choice.
5. Press the MENU button to exit.
Firmware Version
Select this mode to view the firmware version number for this camera and the last date that this
firmware was updated.
1. Press the Down button to select the Firmware Version mode.
2. Press the Right button for the USB Mode details to appear.
3. Press the OK button to revert back to the Setup menu.
4. Press the MENU button to exit.
23