Playback Mode - Vivitar 63009 User Manual

Attention: Video Playback on the TV
The camera does not have a speaker so the voice on the audio cannot be heard when
played back on the camera. The voice can be heard when playing the video back on your
TV or PC.
 Turn on the TV and switch to AV mode.
 Connect the camera to the TV with the AV cable provided
 Select the file you wish to playback
 Press the Shutter button to start playing the file
 Press the OK button to pause and press again to continue
 Press the Shutter button to stop.
Note:
 The camera LCD screen will automatically turn off when the cable is connected to the
camera.
 The battery will also be used when the camera is connected to the TV.
 The TV system may affect the image quality. Be sure to adjust the camera system PAL or
NTSC to comply with the TV system.
 Please adjust the TV setting if the image does not display in the center of TV screen. This
is not the failure of the camera.
 Please use the USB/AV cable provided to connect the camera with the TV.

Playback Mode

In order to playback the media captured with your camera, press the MODE button until the
Playback icon appears on the top left corner of the LCD. You can playback the photos and
videos in your camera.
The Playback mode can also be opened by pressing the Playback button on the camera.
Note: Video and Audio files cannot be heard on the camera itself as there is no speaker, but they
can be heard when downloaded to your PC or when the camera is connected to a TV as
described in the Audio section above.
16