Miele KWL 1090 S Operating And Installation Manual page 19

Once the problem has been resolved
the temperature display will light up
constantly and the alarm will stop.
Only temperatures within the range the
machine can display will be shown. If
the temperature is not within this range,
a bar will be displayed instead.
F1 F5 F8
There is a technical fault. Call the Miele
Service Department.
The safety lock has been engaged.
^ Has the door been open for a long
time? The lighting switches off auto-
matically after approx. 15 minutes.
If not, then the bulb is defective.
^ Remove the plug from the socket or
remove the household mains fuse.
^ Unscrew the bulb and replace it with
a new one.
FU
Bulb specification:
220 – 240 V, max. 15 W, E 14 fitting
^ Screw the bulb into the fitting.
If you still cannot remedy the fault
having followed these suggestions,
then contact the Miele Service De-
partment.
To prevent unnecessary loss of tem-
perature it is advisable not to open
the door whilst waiting for the appli-
ance to be serviced.
19