Miele KWFN 8705 SE ed Operating And Installation Instruction page 14

During normal operation the
temperature displays show the average
temperature in the wine cooler and the
temperature in the warmest part of the
freezer section.
If the temperature in the appliance is
not within the range that the appliance
is able to display (above 0 °C in the
wine cooler, and below 0 °C in the
freezer section), bars will flash in the
temperature displays.
Depending on the ambient temperature
and the setting, it can take the
appliance up to 8 hours to reach the
temperature required and for this
temperature to then be shown as a
constant temperature in the display.
The
– a different temperature is being set,
– the temperature in the wine cooler is
too low,
– the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
A loss of coldness in the freezer section
is no cause for concern in the following
circumstances:
– when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
– when freezing large amounts of food
at once,
– if the temperature of the food you
have recently placed in the freezer
section is too warm,
14
– if the ambient temperature
surrounding the appliance is too
high.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
You can adjust the level of brightness:
, if
^ Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light flashes ;
and a
display.
^ Press one of the temperature selector
buttons repeatedly until an
in the display.
^ Press the Super freeze button again.
^
lights up in the temperature display.
flashes in the temperature
^
appears