Electrical Connection - Miele DA 237 Operating Instructions Manual

Deflector plate
Mount the deflector plate onto the
brackets of the motor unit.
Secure the deflector plate by using
two 5 x 40 mm screws to screw the
enclosed fixing plate through the
motor unit retaining plate to the wall.
Connection for extraction
Connect the vent ducting and se-
cure to the exhaust connection with
a hose clip.
The top end of the vent ducting is di-
rected outside through the wall or
through the ceiling.
Proceed with connection for air ex-
traction (see section on "Air extrac-
tion").

Electrical connection

Connect the deflector plate plug to
the appropriate connector of the
motor unit or control unit.
Plug the mains lead into its socket.
Installation
25