Security - Kyocera Melo User Manual

Location
From , select one of the following:
• 911 Only
(default) shares your position
information only with emergency services
when you call your 3-digit emergency code.
• Location On
shares your position
information, in addition to
emergency services.
Enable Roaming Call Alert
You can set the phone to warn you before you
answer or place a call while roaming.
Note: Call prompt is disabled when the phone is
in Emergency Mode.
Roam Call Alert
From
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept or
place a call while roaming, you must press

Security

This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code (typically 0000
or the last 4 digits of your phone number). Check
with your service provider.
Call Prompt
, select .
1
Lock Phone
Set Lock Phone
With your phone locked, you can call only
emergency numbers or your service provider's
customer service number. You can still receive
incoming calls.
1. Security
From
lock code.
2. Lock Phone > OK
Select
the following:
– Never
– On power up
you turn it on.
– Now
Unlock the Phone
.
1.
From the home screen, select
2.
Enter your four-digit lock code.
Set Limit Calls
You can limit the calls that can be made from
your phone to emergency numbers, your
contacts, and your service provider's numbers.
1. Security
From
lock code.
2. Limit Calls
Select
– No Limit
– Limit Outgoing
while incoming calls still work.
– Limit All
outgoing calls.
, enter your four-digit
and one of
leaves the phone always unlocked.
locks the phone every time
locks the phone immediately.
Unlock
, enter your four-digit
and one of the following:
does not limit calls.
limits outgoing calls
limits both incoming and
.
53