Reset; 3D Colour Management; Base Colour Adjustment; Colour Temperature - Toshiba 32LV665D Owner's Manual

CONTROLS AND FEATURES

Reset

This feature resets all picture settings to the factory settings
except Picture Mode.
NOTE: If any picture settings have not been changed, Reset is
not available.
a
In the PICTURE menu press
Q
press .
b
A confirmation message will appear. Press
select Yes and press

3D Colour Management

When 3D Colour Management is set to On it allows the 'Base
Colour Adjustment' feature to become available.
a
In the PICTURE menu press
Picture Settings and press
b
b
Press to select 3D Colour Management.
Advanced Picture Settings
3D Colour Management

Base Colour Adjustment

Colour Temperature

Auto Brightness Sensor Settings
Active Backlight Control
Black/White Level
Static Gamma
Noise Reduction
c
C c
Press or to select On or Off, and then press
Base Colour Adjustment
The Base Colour Adjustment feature allows the adjustment of
individual colours to suit personal preference. This can be useful
when using an external source.
a
In the Advanced Picture Settings menu press
select Base Colour Adjustment, and then press
b
B b
Press or to select an option, then press
to the adjustment window.
Base Colour Adjustment
Hue
Red 0
Green
0
Blue 0
0
Yellow
0
Magenta
Cyan 0
Reset
b
to select Reset and
C c
or
Q
.
b
to select Advanced
Q
.
On
On
10
0
b
c
to move
Brightness
Saturation
0 0
0 0
0 0
0 0
0 0
0 0
c
C
Press or
Brightness, and then press
settings as required.
Red
d
Q
Press to return to the previous menu.
to
To return to the factory settings, select Reset and press
Q
.
Colour Temperature
Colour Temperature increases the 'warmth' or 'coolness' of
the picture by increasing the red or blue tint.
a
In the Advanced Picture Settings menu press
select Colour Temperature and press
b
C
Press or
setting (0 (warm) – 10 (cool)).
Colour Temperature
Colour Temperature
Red-Offset
Green-Offset
Blue-Offset
Red-Gain
Green-Gain
Blue-Gain
Reset
Q
.
c
B
Press or
and then press
d
Q
Press to return to the previous menu.
To return the Colour Temperature settings to the
factory defaults, select Reset and press
to
Q
NOTE: If Picture Mode is set to AutoView, you can adjust
.
Colour Temperature only, and the range will be -5 to +5.
26
c
to select Hue, Saturation or
B b
or to adjust the
Hue Saturation
0 0
c
to select the Colour Temperature
0
0
0
0
0
0
b
to select the option you want to adjust,
C c
or to adjust the settings.
Brightness
-1
b
to
Q
.
5
Q
.