Setting Up Your Tv; Startup Application; Quick Setup - Toshiba 32LV665D Owner's Manual

Startup Application

Before switching on the television, put your decoder
and media recorder, if applicable, to Standby.
To set up the television, use the buttons on the
remote control as detailed on page 7.

Quick Setup

a
1
Press the button. The Quick Setup screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
Quick Setup
Menu Language
Country
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
b
Highlight Menu Language and press
the menu language.
c
b
Press to highlight Country and
television is now set to tune the stations for your
country.
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list or you want to view DTV programmes but DTV is
not selectable, select Others.
d
Q
Press , and the Location screen will appear.
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
e
C c
Press or to select Home or Store. For normal
home use, select Home.
f
Q
Press . If the Ant/Cable In screen appears, press
C c
or to select Antenna or Cable.
Ant/Cable In
English
Germany
English
English
English
English
C c
or to select
C c
or to select. The
Home
Antenna
g
Q
Press , and the Auto Tuning start up screen will
appear with the option to select between DTV and
ATV, DTV or ATV if available. Use
appropriate mode.
h
b B
Press or
Q
.
Auto Tuning
Tuning Mode
NOTE: If Cable is selected in step 6, additional setting
options appear in the Auto Tuning screen. See the
"Ant/Cable In" section on the next page.
The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.
You must allow the television to complete the
search.
Auto Tuning
Progress
DTV Tune 3%
ATV Tune
When the search is complete the television will
automatically select position one.
The Auto Tuning screen will display the total number
of services found.
i
C c
Press or to view the DTV (digital channel) or ATV
(analogue channel) lists.
j
b B
Use or to move through the list to select a
channel, and then press
In ATV mode some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.
REMEMBER: Press ATV/DTV at any time to select
between ATV and DTV (DTV TV/DTV RADIO/DTV TEXT
if available) modes.
NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.
PLEASE NOTE
The Reset TV menu can also be accessed at any
time from the SETUP menu.
13

SETTING UP YOUR TV

C c
or to select the
to highlight Start Scan, and then press
DTV and ATV
Start Scan
Waiting...
Channel: C7
Q
to view.
Found
2