Starting The Voice Editor - Yamaha MOTIF-RACK ES Owner's Manual

Starting the Voice Editor

After installing the Voice Editor and making the required connection, follow the instructions below
to start the Voice Editor.
Windows
n
In order to use the Voice Editor with your tone generator, you'll need to set the MIDI in/out ports.
● Starting Voice Editor from Studio Manager
1. Start Studio Manager as a plug-in within DAW software compatible with Total Recall, or as a
stand-alone application.
2. Start Voice Editor from Studio Manager.
For more information, refer to the installation guide and Studio Manager PDF manual.
● Starting the Voice Editor in the sequencer software compatible with OPT as a plug-in
software.
The Voice Editor can be used as a plug-in software in any host application compatible with
Open Plug-in Technology (OPT).
Refer to the owner's manual of the host application (sequencer, etc.) for details on using plug-in
software.
n
For OPT-compatible software, the Voice Editor settings will be saved along with the song file.
1. Start the host application.
2. Select "MOTIF-RACK ES Voice Editor" in the host application's "Plug-in" menu.
Macintosh
1. Start the Studio Manager as a plug-in for the DAW compatible with the Total Recall or a
stand-alone application.
2. Start the Voice Editor from the Studio Manager.
For more information, refer to the installation guide and Studio Manager PDF manual.
6
(page 14)