Yamaha MOTIF-RACK ES Owner's Manual page 30

Insertion Effect 1 Unit
1 CONNECT selector
Click on the text box and choose the order in which signals are passed from one insertion
effect unit to the other.
2 Indicator lamps
These show which of the Elements are assigned to the respective Insertion Effect unit. The
Indicator lamps are not available for Drum Voices.
3 [DETAIL] button
Click this to open the Insertion Effect dialog and set the detailed parameters.
4 Effect Type selector
Click on the text box and choose the type of Insertion Effect.
Insertion Effect 2 Unit
Same as Insertion Effect 1 Unit. See above.
System Effects
● Reverb Unit
1 Reverb Send
Use this knob to set the level of the signal of Insertion Effect 1/2 (or the by-passed signal) sent
to the Reverb Effect.
2 Reverb Effect Type selector
Click on the text box and choose the type of Reverb Effect.
3 Reverb Pan controls
Use these knobs to set the stereo positioning of the Reverb Effect.
4 Reverb Return controls
Use these knobs to set the amount of Reverb Effect that is used in the output signal.
1
2
2 5
1
30
3
4
3
4
3 4