Configuring A Connection For Fiery Downloader - Fiery EX12 Installation Manual

2
2-10 Installing User Software on a Mac OS Computer
Modifying the configuration
Edit the configuration whenever there is any change to your Fiery or network, such as
an IP address or device change. Change the specific Fiery Setup information before
configuring the connection.
T
O MODIFY THE CONFIGURATION
1. In the Chooser dialog box, click Option.
2. To edit information for a Fiery, select the Fiery by its IP address or DNS name and click
Modify. Edit information in the Settings dialog box as necessary, and click OK.
3. To add a new Fiery, click Add. Configure the Settings dialog box as outlined in steps
through 6 in the previous procedure.
4. To remove a Fiery, select the Fiery by its IP address or DNS name, and click Remove.
The list of available servers reflects the modifications you have made.
Configuring a connection for Fiery Downloader
When you start Fiery Downloader, you must specify the connection to the Fiery.
B
EFORE YOU BEGIN
• Print the Configuration page from the Control Panel and note the AppleTalk zone of
the Fiery.
T F
O SPECIFY A IERY CONNECTION
1. Double-click the Fiery Downloader icon.
2. Select the AppleTalk zone in which the Fiery is located from the AppleTalk Zones list.
The available servers appear in the Servers list.
4