Completing The Windows 9X/Me Printer Connection - Fiery EX12 Installation Manual

1

1-9 Completing the Windows 9x/Me printer connection

Completing the Windows 9x/Me printer connection
To print from Windows 9x/Me, you should already have set up network servers, if any,
and set up the Fiery to accept print jobs from your computer.
To complete the Windows 9x/Me connection, you must configure a connection on
each Windows computer for the network.
Completing the Windows 9x/Me IPX/SPX or IPX (Novell) connection
If you are printing through a Novell server, the Novell network and file server should
be set up before you begin. The file server should be configured with a print server and
print connection for the Fiery. For details, see your NetWare documentation and the
Configuration
To print from Windows 9x/Me computers over IPX (Novell), you must first set up
IPX/SPX protocols, and then configure the Fiery by choosing the IPX frame type and
entering the settings for the port you use.
T
O SELECT A FRAME TYPE FOR
W 9 /M
INDOWS X E
1. Click Start, choose Settings, and then choose Control Panel.
2. Double-click the Network icon.
Make sure that IPX/SPX-compatible Protocol is listed in the Installed Network
Components section.
For instructions, see your Windows 9x/Me documentation or contact Microsoft
Technical Support.
Guide.
IPX/SPX
PRINTING FOR