Sirius Satellite Radio Sportster SP5 User Manual page 24

Hide thumbs Also See for Sportster SP5:
Table of Contents

Advertisement

4.
Peel the protective material from the adhesive strips (see Figure 10, on page 23)
and press the rubber Cover/Tail firmly into place on the vehicle.
5.
Double check that the location of the antenna and rubber cover/tail are correct, and
continue to press firmly down on the Rubber Cover/Tail for another 30 seconds.
At room temperature (68° F), maximum adhesion usually occurs within 72 hours.
During this period, avoid car washes and other contact with the antenna and the
Rubber Antenna Cover/Tail.
CABLE ROUTING
After you have mounted the antenna you can route the antenna cable to the SIRIUS
Vehicle Dock. Separate antenna cable routing procedures are provided for each type of
vehicle: Sedan/Coupe, Pickup Truck, SUV/Mini-Van and Convertible.
Note that additional breakout illustrations for each step of the antenna cable routing
procedures can be found on the SIRIUS website at http://www.sirius.com. Click on the
Install/Activate link and then follow the link for the Car Installation Tips.
[
24
Installation
]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents