Protection On; Clean Power On; Ground Ok; Power/Security - Monster PowerNet 200 Instructions And Warranty Information

Up to 200 mbps
Hide thumbs Also See for PowerNet 200:
Table of Contents

Advertisement

PoWerneT
200 FeATure sTATus LIgHTs

Protection on

On: Dual Mode Plus surge protection is active
Off: Dual Mode Plus surge protection is inactive
Your PowerNet device may have sacrificed itself to protect your equipment
from surge damage. It may need to be replaced.

Clean Power on

On: Clean Power noise filtering is active
Off: Clean Power noise filtering not active

ground oK

On: Electrical wiring is properly grounded
Off: Electrical wiring is not properly grounded. You may need to consult
a professional electrician to install a ground line for your home.

Power/security

On: PowerNet is receiving electrical power
Off: Power off
If the power/security light is off, you may have installed the PowerNet
device on a faulty or switched wall outlet. It is recommended to install
PowerNet devices in outlets that are always on and are not controlled
by a wall switch. Move the PowerNet device to an unswitched outlet,
or turn on power to the outlet.
During Security Key Setup:
Blinking: key set up active
On: key set up successful, device linked to network
Double Flash: key set up not successful

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital express powernet 200

Table of Contents