IP Settings
This page displays all the IP Settings for the Actiontec Wireless Access Point.
To display the 'IP Settings' page, click
On this page, the following settings are displayed:
IP Address
Subnet mask
Gateway
It is not possible to change these addresses from within the Web Interface.
If you want to change the IP settings of an Access Point that already has
proper IP settings, you need to use the Actiontec Wireless Access Point
Configuration Utility and change them manually.
Configuring the Actiontec Wireless Access Point
V
19
Need help?
Do you have a question about the 11 Mbps Wireless Access Point and is the answer not in the manual?