Audio Command; Camera Command; Help Menu - Mitsubishi Electric DX-PC10E Instruction Manual

9.6 Audio Command

Adding a check mark to the Audio command in the View menu outputs the audio when
plying back the audio-recorded medium. Stopping the image playback starts the audio
for several seconds before and after the stopped frame.
3 levels of audio settings (short/middle/long) are available.
Note:
The audio playback period will vary depending on the recording settings (recording
interval/recording image
quality) etc. of the medium.

9.7 Camera Command

The Camera command in the View menu lets you select the playback camera.
- Selecting ALL initiates sequential playback of all cameras.
- Selecting any other option will add that camera to the group of cameras currently
playing.
- Selecting a camera number from No.1 – No.9. for full screen display. Selecting
multiple numbers of camera initiates sequential playback of all selected cameras. To
select multiple numbers of camera, put check mark during Ctrl key pressed.
- In single screen mode, when not recorded camera number is selected and played
back, other camera image appears and stops. Select the camera number which has
recorded image in single screen mode.

10 Help Menu

Figure 9.7 Camera commands
27