Table of Contents
Advertisement
4.2 Service and User Passwords:
The Transponder system is equipped with two separate Passwords.
1) The User Password, which is the lower security level allows access to all menus except Menu
6: Service Configuration - please refer to the User Manual for further details on password
protection.
2) The Service Password is required in order to enter the Service Configuration Menu. This is a
higher security level than can be accessed with the User Password and therefore ensures that
the Service Configuration is protected, and limited to authorized service personnel.
The master of the vessel has to ensure that only authorized persons are allowed to make
changes to the Service Configuration and ensures that the newly reset password is stored very
carefully, as it can not be reset from the default "NAUT" a second time.
A master key is not available.
Changing the Service Password
Select "Service Configuration" from the Main Menu with the cursor button [Up] & [Down] or press
Nr. 6 on the keyboard.
Note:
The User and Service Passwords are set to "NAUT" – please reconfigure them immediately after
Transponder initial operation. Store the new passwords very carefully.
The password query field appears. Input new Service Password and press [Enter].
Installation Manual
N 1^19' E
0^13' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----|
|
Displ|
----------------------------------------
NUM| Select->|
|
|<-Back
9
Y1-03-0219 Rev. A
Advertisement
Table of Contents
