Mitsubishi Electric Laservue L75-A96 Owner's Manual page 8

8
1. Additional TV Features
Camera Images and Music Files, continued
Phot os and Motion Video as Composite
Video
Connect the camera to the TV using a composite video
cable and control the slide show or movie through the
camera. The display resolution will be standard-defini-
tion (480i).
1.
Refer to the owner's manual supplied with the
camera for instructions needed for this setup.
2.
Set the camera's output signal type to NTSC and
put the camera into playback mode.
3.
With the camera still turned on, connect your digital
camera's composite video cable (usually yellow) to
the TV's Y/VIDEO jack. To hear audio, connect the
camera's audio output cable to the AUDIO L jack.
Optional audio
cable
Composite
video cable
Camera connection using a composite video cable
4.
When the New Device Found screen displays,
assign the name Camcorder.
5.
Press EXIT to close the New Device Found
screen.
6.
If viewing photos, control the slideshow from the
camera. Advance through the images manually or
check if the camera can advance automatically.
For assistance call 1(877) 675-2224
INPUT 1 INPUT 1 INPUT 2 INPUT 2
TV
Using an A udio- Only Device
To use the TV speakers with an audio device such as an
MP3 or CD player with analog output, follow these steps.
1.
Insert an unused RCA-style connector into the
Y/VIDEO jack associated with the TV's analog audio
input. The presence of this connector activates the
TV's auto-detection.
2.
When the TV detects the Y/VIDEO connector, it will
display the New Device Found screen. Name the
new input CD/Audio or MP3 Player.
3.
Connect left (white) and right (red) audio cables from
AUDIO OUT on the device to the L and R audio inputs
on the TV.
4.
Keep the connector in the VIDEO/Y jack while using
the audio-only device.
Audio-only
device
Unused
RCA-style plug
(plug in first)