Mitsubishi Electric Laservue L75-A96 Owner's Manual page 16

16
2. TV Menus
Picture, continued
Contrast • Low contrast shows a variety of shades in darker
images.
• In most home lighting situations, medium contrast looks
best.
• High contrast shows darker images more uniformly
black and makes colors appear more vibrant. High con-
trast is good for brightly lit environments.
Brightness Adjusts overall picture brightness. Settings are stored independently for each Picture Mode.
Color Adjusts overall color intensity from monochromatic to fully saturated.
Tint Adjusts the red-to-green ratio.
Sharpness Adjusts picture detail and clarity.
Color High
Temperature
Low
Video High,
Noise Medium,
Low, Off
EdgeEnhance On, Off
DeepField On, Off
Imager
Demo
Picture Pi cture+
Screensaver On, Off Select On to display a screensaver pattern while playing an audio-only input. To
Film Mode Auto, Off 480i and 1080i signals only. In Auto, the TV automatically detects and applies
Smooth 120 Highlight the icon and press ENTER to make changes. When
Film Motion active, reduces motion blur in action scenes but may show
pixel structure during slower motion or in still images. Works in
conjunction with Film Mode. The adjustment side of the screen
only shows changes if the content was a film source shot at 24
frames per second.
Test Picture
For assistance call 1(877) 675-2224
Gives white images a cool cast. May provide the
most realistic picture under bright lighting.
Gives white images a warm cast. Natural/
Color Temp at the low setting displays video at
approximately the 6500K industry standard for
NTSC pictures.
• High. For poor-quality signals.
• Medium. For moderate noise reduction.
• Low. For good-quality signals.
• Off. Leaves the picture unaltered.
EdgeEnhance™ adds special edge enhancements to make the image appear sharper.
DeepField™ Imager dynamically enhances black levels in portions of the screen to
provide strong contrast with detail over mixed screen content.
For comparison, displays a split picture to show On (right side) and Off (left side).
(Picture Plus)
use this feature, the input must either
• Be named as an audio source (e.g., CD, MP3 Player)
or
• Be the antenna input tuned to an audio-only signal.
film-decoding correction to movies filmed at 24 frames per second. Try the Off
setting if images show many jagged edges. Setting saved by input.
Press ENTER to display a test picture.
Adjusts the white-to-black level
Settings are stored independently
for each Picture Mode.
Adjusts the white balance. Set-
tings are stored independently
for each Picture Mode.
Reduces minor noise (graininess)
in the picture.
Press to make adjustments.