Specifications - Mitsubishi Electric DLP WD8700U User Manual

Specifications

The specifications and outside appearance of the projector are subject to change without prior notice.
Type
Model
Display technology
Projection lens
Light-source lamp
Image size (projection distance)
Maximum resolution
Computer/component video input
Video input
HDMI input
Control terminal/others
Operating temperatures
Rated voltage
Power consumption
Dimensions (not including protrusion)
Weight
Others
Replacement part (option/not included in the box)
Spare lamp: VLT-XD8600LP
Option lenses: OL-XD8000EZ, OL-XD2000SZ, OL-XD2000LZ, OL-XD2000TZ, OL-XD8000UZ, OL-XD2000FR
Option color-wheel: CW-FC5
Important:
• Ask a trained specialist for mounting or replacing the option lens or the option color-wheel. For details, contact
your dealer.
DLP™ projector
WD8700U
0.65-inch Single chip DMD
Pixel 1280 x 800 = 1024000 pixels
F 2.0 - 2.4 f= 24.5 - 33.1 mm
350 W x 2
40" min. to 300" max. (projection distance 1.5 to 11.4 m)
Computer signal Maximum resolution: 1920 x 1200 dots (compressed)
Panel resolution: 1280 x 800 dots
Video signal NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
Component signal 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Panel resolution: 1280 x 800 dots
[Signal type]
Analog RGB
Analog RGB
Digital RGB
[Signal type]
Video input
S-video input
[Signal type]
HDMI
SERIAL IN/OUT (D-SUB 9-pin male) RS-232C standards,
LAN (RJ-45), REMOTE 1 IN (D-SUB 9-pin female), REMOTE2 IN/OUT
(Stereo mini jack (ø3.5))
+41°F (+5°C) to +104°F (+40°C): ( Standard altitude mode)
+41°F (+5°C) to +95°F (+35°C): ( High altitude mode: Floor installation/
AC 100 - 240 V, 50/60 Hz
9.3 A, 910 W
During standby:
490 mm (W) x 201 mm (H) x 421 mm (D) (projector only)
490 mm (W) x 201 mm (H) x 506 mm (D) (including the terminal cover)
16 kg (projector only), 16.5 kg (including the terminal cover)
S-video input Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
Video input Vp-p=1.0 V 75 Ω (negative sync)
Component video YC
input
Analog input RGB: Vp-p=0.7 V 75 Ω (negative sync)
YC
HD/CS: TTL-level (negative or positive polarity)
VD: TTL-level (negative or positive polarity)
Digital input (DVI) DVI-D interface (TMDS single link) with HDCP
Digital input (HDMI) HDMI interface (TMDS single link)
[Terminal type]
Mini D-SUB 15-pin
5 BNC
DVI-D 24-pin
[Terminal type]
BNC
S
[Terminal type]
HDMI 19-pin
AC 100 - 120 V: 2 W (when STANDBY MODE is STANDARD)
0.2 W (when STANDBY MODE is LOW)
AC 220 - 240 V: 2 W (when STANDBY MODE is STANDARD)
0.3 W (when STANDBY MODE is LOW)
C : Vp-p=1.0 V 75 Ω (Y) (negative sync)
B R
Vp-p=0.7 V 75 Ω (C
C : Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
B R
EN-74
ceiling installation)
, C )
B R
[Line]
1
1
1
[Line]
1
1
[Line]
1
, C )
B R