Sonic Impact Technologies i-Fusion User Manual page 10

SYMPTOM POSSIBLE PROBLEM
Sound source is distorted.
______________________
Battery power is low.
Sound is Volume level in operating
distorted system is set too high.
(when
connected
to PC or
laptop)
Radio Too close to a radio tower
interference
Clips Tension of release button
securing needs adjustment.
hinge straps
releasing.
For further assistance please contact Sonic Impact Technologies at
service@si-technologies.com.
SOLUTION
WAV and MID files are often of poor
quality; therefore distortion and noise are
easily noticed with high-powered
speakers. Try a different audio source
such as a music CD.
Recharge battery and/or use AC adapter.
Check the operating system volume level
and decrease it if necessary.
Move your speakers to see if the
interference goes away.
Insert the tip of a ball point through the
hole in the back of the clip and push in.
This will tighten the tension on the
release button.