Table of Contents
Advertisement
Display cost: if enabled, displays the duration and
charges of the call. Disabled mode is the default mode.
If you want to enable this function, you need to
acquire a PIN2 code from your network operator.
Accum. charges: this service is only available when
your SIM card contains charging information. Use this
service to configure or view all charge information
related to your calls.
The following can be configured:
Show cost
Displays total charges of
all outgoing and incoming
calls since the last reset.
Reset charge count
Resets the counter to
zero (protected by PIN2
code).
Show balance
Displays available bal-
ance.
Show limit
Displays maximum limit
available.
Cancel limit
Cancels maximum limit
available on charges
(protected by PIN2
code).
Set limit
If the charges exceed the maximum limit,
you cannot make or receive calls. All
chargeable calls will be disconnected auto-
matically.
Call tariff: displays the rate per call unit. This infor-
mation is stored in the SIM card. You can also reset
and set the rate.
23
Sets maximum limit for
charges (protected by
PIN2 code).
Advertisement
Table of Contents
