Charge The Battery; Set Battery Alert - Sonim XP3 User Manual

4. Close the battery cover. Rotate the battery cover
screws in a clockwise direction.
5. To remove the battery, lift the flap behind the phone
and raise the lower end of the battery from the slot.
The battery can now be removed.

Charge the battery

The battery delivered with your
mobile phone is not fully charged. We
recommend that you charge your
mobile for three hours before you use
your mobile phone for the first time.
1. Insert the charger plug into a
220V AC power outlet.
2. Align the charger connector with
the USB socket at the bottom of
the phone and insert it.
3.
4.
5.


Set battery alert

When you set the battery alert, every time the battery
Charge battery
charge is low you hear an alarm.
1.
9
If the battery is being charged
when the phone is switched off,
only the battery icon with the mes-
sage Charging is displayed (as
shown in the adjacent figure).
When the battery has been fully
charged, the message Completed
If the battery is being charged while the phone is
switched on, you will notice that the bars in the battery
charge icon (visible on the home screen) show
movement indicating that the battery is being charged.
After the phone is fully charged the battery bars on the
display stop scrolling. You can safely disconnect the
charger from the phone.
After the charging process has begun, the only way to
stop charging is to disconnect the charger. If possible,
use a power jack that is easy to plug and unplug.
Vibrate mode is automatically disabled when the
charging cable is inserted into the USB socket.
To set the battery alert select Menu
tings > Normal > Personalize
is displayed.
> Quick set-
> Battery alert >