Page 33
You will only get mono audio this way, however. You can avoid using an RF modulator by connecting ReplayTV to a VCR. See “Connecting ReplayTV to a TV that has a VHF/UHF jack only” on page 19 for more information.
Page 34
Note: This process requires a VCR. Note: Set the input on your VCR to display the output from your ReplayTV. Press the Input Select or TV/Video button on your VCR. You may also need to tune your TV to the channel that displays video input. Refer to your VCR owner’s manual for...
Page 35
Note: You can connect your cable box to your ReplayTV in one of three ways:...
Page 36
Note: You can connect your satellite receiver to your ReplayTV in one of two ways:...
Page 40
Locating the infared detector Note: If you only want your ReplayTV to control one device, hide the unused emitter behind the equipment, away from any detectors. Affix the IR Blaster directly over the infared detector...
Page 47
Note: If you are watching a show that is blocked, you can go to another channel by press- ing the CHANNEL +/- buttons on the ReplayTV universal remote control.
Page 67
A or B, before recording shows with your ReplayTV. ReplayTV does not know if the switch is set to A or B, so it will assume that the switch is set correctly.
Page 74
More Options Red lines indicate Show Extender will be used.
Page 84
Note: While the show is being saved to videotape, do not press any buttons on your ReplayTV universal remote control. On-screen displays will be recorded if they appear.
Page 91
Note: When the batteries need replacing, the LED on the remote control will blink twice with every button press. Simply replace the batteries and the remote control will be restored to its full functionality.
Page 95
*If you are searching for your VCR or DVD player code, you may want to search with the PLAY button rather than the POWER button. When your VCR starts to play, press CODE SET to lock in your code.
Page 108
Setup. Contact your telephone company to obtain the correct dialing prefix information. • ReplayTV cannot connect to the ReplayTV Service if your telephone line has a stutter dial tone. If you have a message service using a stutter dial tone to indicate new messages, you will need to delete/save all of your messages in order to disable the stutter dial tone.
Page 109
6) Problem description. In most cases, the correct information can be added to the ReplayTV Service database within 48 hours. • Don’t worry, nothing is wrong. ReplayTV only needs the first 6 digits of your phone number. The last four (4) numbers will appear as follows: XXXX •...
Page 110
• Refer to “Connecting ReplayTV to a TV that has a VHF/UHF jack only” on page 19. • If you do not have a phone jack near ReplayTV, you can use a wireless phone jack instead. In particular, the Phonex Wireless Modem Jack (Part # PX-421) has been qualified to work with ReplayTV. It operates at speeds up to 56k baud.
Page 111
• If your original remote control required an Enter button press when changing channels, press the ENTER button on the ReplayTV remote control after you enter the channel number. • Refer to “Changing volume lock” on page 111and “unlock” the volume controls.
Page 112
ReplayTV. For example, if you needed to enter 0 - 5 to tune to channel 5, you need to “tell” ReplayTV this information during the on-screen setup.
Page 113
• Press and hold the POWER button on the front of ReplayTV for 10 seconds, then release. ReplayTV will reboot in a few moments. • Unplug the power cord for 15 seconds then plug it back in. ReplayTV will restart and power on in a few moments.
Page 114
33 closed-captioning and ReplayTV 31 A/B cable systems 55 component codes, searching for 86 A/V receiver 23 component does not respond to the ReplayTV 88 attaching the IR Blaster 24 connecting automatic updates to ReplayTV 3 A/V receiver 23...
Page 115
43 DVD player operating with ReplayTV remote control 85 laser disk setup codes 96–97 setup codes 97 learning the codes programmed into the ReplayTV remote Fast Foward 50 features of the remote control 78 live TV Find Shows controlling 47...
Page 116
57 Pause Screens 48 Theme-based shows 59 phone jacks, wireless 15 Record Options phone line near my ReplayTV is being used by my satellite Default 64 receiver/cable box 105 Guaranteed 63 phone outlet is too far away 103...
Page 117
86 TV has no composite input or S-video inputs 103 switch among components 81 TV is blue 102 Replay channel 37 TV operating with ReplayTV remote 83 Replay Guide 35 TV/VCR combo ReplayZones 39 programming problems 103...
Need help?
Do you have a question about the ReplayTV and is the answer not in the manual?
Questions and answers