Table of Contents
Advertisement
BATTERY CHARGING
Charger
Connector
1
• Plug the battery connector into the charger connector.
2
• Plug the charger into a standard wall outlet.
Notes:
- If power flow to the wall outlet is controlled by a switch, make
sure the switch is "ON".
- Use the charger only in a wall outlet. Do not plug the charger in
to a ceiling outlet.
• Before first time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery after each use of your vehicle for at least
14 hours. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector
from the battery connector. Unplug the charger from the
wall outlet. The battery is now ready to be installed in your
vehicle. Please see "Battery Installation" on page 13 for
detailed instructions on installing your battery. If your battery is
already installed in your vehicle, simply re-connect the battery
connector and motor connector and replace the battery retainer.
R2510pr-0921
Battery
Connector
Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should not
handle parts, including the battery, or help in
assembly of the vehicle.
1
• Insert and "snap" the key into the dash.
ASSEMBLY
WARNING
Key
Dash
7
Advertisement
Table of Contents
