Table of Contents
Advertisement
5.
Turn over the notebook to the ordinary position, and open the display panel.
6.
Remove the memory compartment cover by pressing down and then out.
Figure 6-3. Removing the Compartment Cover
7.
Raise the tape attached on the memory module board until it snaps up, and
gently draw out the module board.
Figure 6-4. Removing the Memory Board
8.
Inclining the memory module, match its notched part with the board, and push
down the memory module on both ends.
Notched part
Figure 6-5. Attaching the Memory Module on the Memory Board
Tape
Hardware Expansion 6-7
6
Advertisement
Table of Contents
