Sharp PC-9080 Manual page 89

Connecting Video Equipment
1. Turn off the notebook and its peripherals.
2. Connect one end of an attached cable to the output terminal of the video
equipment, and connect the other end to the video input jack or S video
connector of your notebook.
When inputing normal video signals to the notebook, use the TV cable.
When inputing S-video signals to the notebook, use the S-video cable.
3. Turn on the notebook.
4. Press the F2 key when the message Press <F2> to enter SETUP appears.
5. On the Main page of the Setup Utility, set Video Input to Video Capture.
4
6. Press the Esc key and select Save Changes & Exit. The system restarts.
Connecting TV
1. Turn off the power to the notebook as well as any connected peripherals.
2. Plug one end of the video cable into the video output jack on the notebook.
3. Plug the other end into the video input jack of the TV.
4. Turn on the power to the TV as well as the peripherals.
5. Power up the notebook.
6. Switch the TV to the video mode.
7. From the Windows Start button, select Settings - Control Panel.
8. Double-click Display.
9. Select Settings.
10. Set Color palette to 256 Color or High Color (16 bit), and Desktop area to 640
400 pixels. Then click OK.
4-14 Connecting Audio/TV/Video Equipment