Recording; Recording With The Built-In Microphone - Sharp WA-MP50H Operation Manual

Recording with the built-in microphone

WA-MP50H
WA-MP55H
ENGLISH
Check the memory status beforehand (see page 42). If the
memory is low, move some data to a PC to make some room.
MIC
Note:
This microphone is monaural and omni-directional. How-
ever, it is recommended to direct it toward the source for
better recording.
1
Press the POWER button to turn the power on
(see page 8).
POWER
2
Hold down the menu button for 0.5 seconds or more.
Hold down the menu button for 0.5 seconds or more
to return to the play mode.
3
Within 10 seconds, move the menu button toward
or to select "RECORD", and press it.
E-33
WA-MP50_55H TINSZA051SJZZ
4
Within 10 seconds, move the menu button toward
+ or - to select "RECORD MIC", and press it.
MIC
" Recording will be started.
" If the memory is low, "Disk Is
Full! Can Not Record" ap-
pears (recording is not possi-
ble).
To interrupt recording:
Press the menu button.
To resume recording, press the menu button again.
To stop recording:
Press the button.
Data will be saved.
Note:
Data recorded with the unit are named automatically as follows.
FM radio recordings: F001.mp3, F002.mp3...F999.mp3
Line-in recordings: L001.mp3, L002.mp3...L999.mp3
SOUND
Microphone recordings: M001.mp3, M002.mp3...M999.mp3
(Maximum number: 999)
Newly saved files are numbered sequentially following
the largest number among the existing file names. It is
recommended to delete or move files from one with the
largest number. To transfer data to a PC, see "To use as a
USB storage device" on page 43.
RECORD
RECORD
RECORD MIC
RECORD LINE-IN
00:00:01
01:23:45
File name3

Recording...

Remaining recording time
05/5/23 WA-MP50_55H_SEEG_E.fm