Listening To The Fm Radio - Sharp WA-MP50H Operation Manual

Listening to the FM radio

WA-MP50H
WA-MP55H
ENGLISH
! Tuning
FM aerial:
The earphone lead works as an
FM aerial. Keep it as straight as
possible.
Changing the FM area:
The tuner is set to receive frequen-
cies for broadcasting in Europe
when shipped from the factory.
You can change the FM area to
USA (see page 32).
1
Press the POWER button to turn the power on
(see page 8).
POWER
2
Hold down the menu button for 0.5 seconds or
more.
Hold down the menu button for 0.5 seconds or more
to return to the play mode.
3
Within 10 seconds, move the menu button toward
or to select "FM TUNER", and press it.
E-29
WA-MP50_55H TINSZA051SJZZ
4
Move the menu button toward + or - to select
"Searching".
5
Move the menu button toward
MIC
to the desired station.
Manual tuning:
Move the menu button toward
times as required to tune in to desired station.
Auto tuning:
When the menu button is held toward
more than 0.5 seconds, scanning will start automati-
cally and the tuner will stop at the first receivable
broadcast station.
SOUND
Notes:
" When FM radio interference occurs, auto scan tuning
may stop automatically at that point.
" Auto scan tuning will skip weak signal stations.
" To stop auto tuning, move the menu button toward
or again.
After use:
Hold down the POWER button for 2 seconds to enter the
power stand-by mode.
FM TUNER
05/5/23
Searching
87.50MHz
Stereo
or to tune in
Searching
98.80MHz
Stereo
or as many
or for
WA-MP50_55H_SEEG_E.fm